QS-326 Agricultural Antifoam Silicone Surfactant with Low Foam Wetting Spreading Penetrating Agent
Silicone surfactant / agricultural silicone spray adjvuant silicone sticker additive
wetting agent spreading penetrating agent
Product Name |
Low foam Silicone surfactant for agricultural , spray adjuvant, organosilicone |
Item No. |
QS-326 |
CAS No. |
27306-78-1 |
Appearance |
Clear, little yellow liquid |
Main Ingredient |
Silicone |
Freezing point |
<-1°C |
Cloud Point(1% Wt) |
<10°C |
Specific Tension (0.1% aq.) |
19.0-23.0mN/m |
Viscosity (25ºC) |
10-60cSt |
Active Content |
100% |
Solubility |
Dispersible in water |
Function |
Spreading, penetrating |
Superiority |
Quickly and thoroughly enhance the agro-chemical's penetrability, dispersity, absorption, transportion on the plant. |
How to use
In Agrochemical Formulations
recommended that QS-326 spray adjuvant be used at a concentration of 0.5-8%, based on the total formulation.
Dosage
QS-326 spray adjuvant has been used successfully in spray applications globally. Typical applications include:
Application |
Typical Use Rate(a) |
Plant Growth Regulators |
0.025% to 0.05% |
Herbicide |
0.025% to 0.15% |
Insecticide |
0.025% to 0.1% |
Fungicide |
0.015% to 0.05% |
Fertilizers and Micronutrients |
0.015% to 0.1% |
(a) Note: use rates are dependent on crop, agrochemical and spray volume requirements.
As a tank mix adjuvant
when used as a tank-side adjuvant may be used to improve spray coverage, improve uptake or to allow for a reduction in spray volume.
QS-326 spray adjuvant is most effective as a tank-side adjuvant when spray mixtures are within a pH range of 5-8, andused within 24 hours of preparation.
Dosage:
1.5-3g add into 15kg liquid.
As High spray volumes, coupled with high surfactant rates, are not required to achieve sufficient coverage with QS-326 spray adjuvant.
In fact, QS-326 spray adjuvant has the potential to provide adequate coverage in many low volume spray applications at rates between 0.025% and 0.1%.